Lan Bridge Integration - Siemens Hicom 150 E Office Service Manual

Hide thumbs Also See for Hicom 150 E Office:

Table of Contents

Hicom 150 E Office Rel.1.0 Service Manual -

Figure 6-14 Bus topology

6.2.2.8 LAN Bridge integration

Requirements for integration

1 LAN Bridge per OfficeCom/OfficePoint

OfficeCom/OfficePoint starting from SW Version 1.0

ISDN trunk connection

One of the three interfaces described above

One LAN Bridge per system is supported. There are no plans for special country variants.

200 logical subscriber ports

60 logical lines

Procedure for integration

Remove the power plug (deactivate UPSC if applicable)

Insert the board

Insert the power plug (activate UPSC if applicable)

This sequence must be observed to guarantee successful LAN board login.

6.2.2.9 Start-up

http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_6fc.htm (7 of 11) [06/04/2000 13:07:52]

Table of Contents