Service - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 8.42 Connecting enhanced PSE radio paging equipment (multitone) to a TMOM board
8.42 Connecting enhanced PSE radio paging
equipment (multitone) to a TMOM board
Introduction
A multitone Access 3000 with ESPA 4.4.3 protocol is installed along with a pocket receiver with a
5-digit display.
Example
Extension 100 receives the assignment for the pocket receiver.
The pocket receiver's search number is 000.
The TMOM is inserted in slot 06.
Programming with Hicom Assistant T
Step Entry
1. *95 31994
2. 321
3.
* 0601
4. F2
5.
* 2
6. F2
7.
* 2
8. F2
9.
* 6
10.
F2 * 6
11.
F2 * 1
12.
F2 * 5
13.
F2 * 2
14.
F2 * #
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_842.htm (1 of 2) [06/04/2000 13:08:57]
Start system administration
Select the PSE port
Enter port
Enter the PSE type
Change the PSE type to "Enhanced"
Enter the protocol
Enter protocol ESPA 4.4.3
Set the operating mode
Ring type for urgent calls
(depending on the PSE)
Ring type for normal calls
(depending on the PSE)
Ring type for text calls
(depending on the PSE)
Enter the code length for the call number
(depending on the PSE)
Enter fillers for the call number (depending on the
PSE)
Enter fillers for the call number (depending on the
PSE)
Action Display
System Administration
Sl/Le: -
Sl/Le: 0601
Type: -
Type: Enhanced
Type: ESPA 4.4.5
Type: ESPA 4.4.3
Service code: -
Service code: 6
Service code: 6
Service code: 1
Amount: 5
Fillers: Right
Filler: #