Ucd Group Status Display - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
Feature available in
HW requirements
SW requirements
Dependencies/Limitations
Subject
Agent status
System night service
Group-specific night service
destination
Calls currently being processed
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Activate UCD night service.
2. Call UCD group.
3. The call is placed with the UCD night extension.

7.2.21 UCD Group Status Display

Definition
The number of calls that are waiting in the queue can be displayed on the screen of the optiset E
terminal by means of a procedure or a code.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (31 of 48) [06/04/2000 13:09:59]
x
-
As of Rel. 1.0 As of Rel. 1.0
Activating the night service feature does not change the current
status of the individual agents.
UCD night service can be activated independently of the
system night service feature and vice versa. If a call reaches a
UCD group by way of system night service, the call remains in
the UCD group independently of the UCD night service
feature.
The group-specific night service destination can be an internal,
external or any other UCD group.
Calls that are being processed during activation of the UCD
night service feature remain unaffected.
Action
OfficePro
x
digit. subscriber module
As of Rel. 1.0
x _
- -
_
Dependency/Limitation
OfficeCom
x
As of Rel. 1.0
_
-
_
OfficePoint OfficeOne
_ _
_ _
_ _