Lan Bridge Connection; Brief Description; Brief Overview - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual -
Connection to printer/modem/PC: connect 9-pin Sub D socket (female) to the printer/modem/PC.
Consult the operating instructions provided by the manufacturer before starting up a
printer/modems/PC.
For information on output formats (compressed, uncompressed) for call detail recording,
central see

6.2.2 LAN Bridge connection

6.2.2.1 Brief description

LAN Bridge is an expansion board for Hicom 150 E OfficeCom/OfficePoint. It is used for connecting
a "local" LAN to OfficeCom/OfficePoint and for linking up to "external" LANs via the system's ISDN
interfaces.
Telematic and CTI functions are also supported.
The connection to the "local" LAN is set up either via an Ethernet twisted-pair interface (RJ 45
connector) or an Ethernet AUI interface
the 50-pin edge connector of any expansion port in OfficeCom.
A separate V.24 interface is available for loading and administrative purposes.
Note
The LAN Bridge connection to OfficePoint is set up using the STLS board in slot 5.

6.2.2.2 Brief overview

Hicom 150 E OfficeCom/OfficePoint and LAN Bridge.
Service
Telematic services (vCAPI) Group 3 fax machine, outgoing traffic*
Telephony services (CTI)
Administration
LAN types
LAN-LAN coupling
Remote LAN Access
Router functions
* only one incoming or outgoing transfer at a time
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_6fc.htm (2 of 11) [06/04/2000 13:07:52]
Section 7.12.8.
1
Layout
Group 3 fax machine, incoming traffic with DID*
File transfer (e.g. Eurofiletransfer)
Dialling aid
Call log
LAN Bridge administration
Ethernet, twisted pair interface, AUI interface
PPP: point-to-point log
IP routing (compatible with market standard)
IPX routing
Central firewall
Short hold mode
Channel bundling as required, configurable
Broadcast filtering
(Sub-D 15-pin). The connection to the system is set up with