Error Correction Options; Automatic Error Correction - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 13 Service
No. Meaning
0 Unknown board type
1 Board deactivated
2 More than one SLMC
3 Board type incompatible
Error class 28 - Recovery
Table 13-13 Error class 28 - recovery
No. Meaning
4 Remote test input
Error class 29 - IOP
Table 13-14 Error class 29 - IOP
No. Meaning
24 Board failure
25 Board is present. LW was restarted. Reload board Replace board

13.3.6 Error correction options

Automatic error correction

Manual error correction without Hicom Assistant E
Error correction with Hicom Assistant E
13.3.6.1 Automatic error correction
Each error in the error memory is assigned an action that can correct the error that occurred. The
following software actions can be carried out:
Hard restart
Reload board
Reload CDB backup
Disable ports
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_13.htm (13 of 19) [06/04/2000 13:06:54]
Recovery
action
None
Reload board
None
None
Recovery Technician
action action
None None
Variant
Technician
action
Replace board
None
Only 1 SLMC
Replace board
Recovery Technician
action
action
Reload board Replace board
Page
13-17
13-17
13-18