Siemens Hicom 150 E Office Service Manual page 21

Hicom 150 E Office Rel.1.0 Service Manual - Figures
Figure 3-58 Installation location of PFT1 and PFT4 (MDFU/MDFU-E)
Figure 3-59 PFT1 (S30777-Q539-X) and PFT4 (S30777-Q540-X) board
assignment
Figure 3-60 Installation location for REAL (backplane of the basic cabinet)
Figure 3-61 REAL relay contacts (de-energised state) and MDFU interfaces
Figure 3-62 STRB interfaces (S30817-Q932-A)
Figure 3-63 V24 interfaces (S30807-Q6916-Xxxx)
Figure 3-64 V24 pin assignment in OfficeCom/OfficePoint
Figure 3-65 Connection of V.24 adapter cable (S30122-X5468-X1) for OfficeOne
Figure 3-66 Connection of modem adapter for OfficeOne only
Figure 3-67 Connection of printer adapter for OfficeOne only
Figure 3-68 Connection of Hicom Assistant E to Hicom 150 E OfficePro
Figure 3-69 Assignment of the V.24 cable (C39195-Z7267-C13) for OfficePro
Figure 4-1 Hicom 150 E OfficePro - removing the front and rear covers
Figure 4-2 Hicom 150 E OfficePro - mounting a two-cabinet system (stacked)
Figure 4-3 Hicom 150 E OfficePro - mounting the base elements using a three-cabinet system
as an example
Figure 4-4 Hicom 150 E OfficePro - installation of a two-cabinet system (side by side)
Figure 4-5 Hicom 150 E OfficePro - installing a three-cabinet system (stacked cabinets)
Figure 4-6 Hicom 150 E OfficePro - earthing concept for the system cabinet(s) and the main
distribution frame
Figure 4-7 Hicom 150 E OfficePro - protective earthing option 1a
Figure 4-8 Hicom 150 E OfficePro - protective earthing option 1b
Figure 4-9 Hicom 150 E OfficePro - protective earthing option 2
Figure 4-10 Stripping the open-end cable
Figure 4-11 Hicom 150 E OfficePro - Backplane of the basic and expansion cabinets
Figure 4-12 Two-cabinet system - connecting cable between BC and EC1
Figure 4-13 Three-cabinet system - connecting cable between BC, EC1 and EC2
Figure 4-14 Assignment (numbering) of the splitting/jumper strips (view from above)
Figure 4-15 MDFU - layout and dimensions (367.0 x 328.8 x 125.4 mm)
Figure 4-16 MDFU-E - layout and dimensions (669.0 x 328.8 x 125.4 mm)
Figure 4-17 View of the dual board connector for flash and modem cards on the CBMOD
Figure 4-18 Slot identification and widths in the BC, EC1 and EC2
Figure 4-19 Hicom 150 E OfficePro - starting up the subscriber line circuits and ports
Figure 4-20 PCM sequence of a single-cabinet system
Figure 4-21 PCM sequence of a two-cabinet sequence
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/h150_ehb.htm (3 of 6) [06/04/2000 13:02:15]