Call Forwarding (Cfw) - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
Step
1. Configure call forwarding - no answer
*9531994
2. 16-18 => Call Management Inc - CM-Elements
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step
1. Options
2. Incoming Calls
3. Call destination lists + Assignment in./ext. calls
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Configure call forwarding - no answer for an extension.
2. Call the extension.
3. The call should be forwarded to the programmed destination at the programmed time.

7.2.5 Call Forwarding (CFW)

Definition
Call forwarding enables you to forward all incoming calls (including voice calls) to another
destination. Call forwarding is implemented on an extension number basis, regardless of how the call
reached the activating terminal. If line keys have been configured, CFW can also be activated
individually for a specific line key. The following destinations are possible:
Another subscriber extension
The attendant console
An external destination
A voice messaging system
A hunt group
The user is notified when "call forwarding" is activated on a telephone. This can be in the form of a
special dial tone, an indication on the display or an LED signal.
Outgoing calls can continue to be made when call forwarding is activated.
Model-Specific Data
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (10 of 48) [06/04/2000 13:09:57]
Action
Action
Action