Siemens Hicom 150 E Office Service Manual page 660

Hicom 150 E Office Rel.1.0 Service Manual - 8.34 Configuring an AC
15. F8 33-1
16.
* 2
17. F2
18.
* 1
19. F2
20.
* 1
21. F8 16-18-1 Display CM-Targets
22.
# 13 +
23.
* 13
24.
F2 #12
25.
* 13
26. F2
27.
* 13
28. F8-F7
Programming with Hicom Assistant E
Step
1. Options -> System Parameters -> Diversion / VPL
2. Options -> Incoming Calls -> Call destination lists
3. Options -> Incoming Calls -> Assignment int./ext. calls
Note
The "Release", "Call" and "Trunk group" keys should be programmed at the AC.
| Siemens
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
Conversion Date: 1998-09-18
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_834.htm (2 of 2) [06/04/2000 13:14:31]
Display number of queued calls
Change number of queued calls to 2
Display speed transfer mode
Release speed transfer mode
Display transfer undialled trunk
Release transfer undialled trunk
Select call destination list 13, Mbr 2
Change Mbr 2 to 13
Display assignment of internal call to call destination
list
Change to call destination list 13
Display assignment of external call (day) to call
destination list
Change to call destination list 13
Exit system administration
Action
| Home | First Page | Previous Page | Next Page
Amount: 15
Amount: 2
Mode: Denied
Mode: Allowed
Mode: Denied
Mode: Allowed
List 1, Mbr 1: Call
List 13, Mbr 2: -
List 13, Mbr 2: 13
Call No. 12: 16
Call No. 12: 13
Call No. 12: 14
Call No. 12: 13
Set time, Set date
| Search | Info | Help |