Performing A Visual Inspection - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual -

4.2.8 Performing a visual inspection

A visual inspection of the hardware, cables and power supply is to be performed before the system is
started up. The visual inspection must be performed when the system is in energised state.
Caution
Ensure that the system is earthed and disconnected from the power supply before
commencing workgeerdet und .
The antistatic wristband must always be worn and the measures for protecting
electrostatically sensitive devices (see
Step Action
1. Compare the slots for the
existing boards with the
component mounting
diagram.
2. Check the local supply
voltage.
You can begin to start up the system as described in
has been completed.
| Siemens
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
Conversion Date: 1998-09-18
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_4fc.htm (9 of 9) [06/04/2000 13:04:51]
Tools/remarks
Component mounting diagram for
boards
Digital multimeter
| Home | First Page | Previous Page
Page 1-5) must be observed.
Section 5.2
| Next Page |
Possible remedies
Correct board configuration
and notify appropriate sales
department.
once the visual inspection
Search | Info | Help |