Configuring A Fax Machine - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 8.7 Configuring a fax machine

8.7 Configuring a fax machine

Example
Analog fax machine with extension "124".
Incoming fax message display programmed on key on terminal "102" (optiset E Standard).
Programming with Hicom Assistant T
Step Entry
1. *95 31994 Start system administration
2. 14-11 Set up the extension type
3. Select extension 124
# 124
4. Select "Fax" as the extension type Ext 124: Fax
* 1
5. F8 F7 Exit system administration
Programming with Hicom Assistant E
Step
1. Options -> Set up station -> Station -> Param -> Type
Example
Program an info key on terminal 102
Step Entry
1. *91
2.
3.
4.
5.
6.
124
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_87.htm (1 of 2) [06/04/2000 13:12:30]
Action
Action
Action
Program key
Select the required key
Confirm key change
Press "Next" until "Fax details" appears Select feature:
Confirm selection
Enter the fax number
Display
System Administration
Ext 100: Auto-start
Ext 124: Auto-start
Set time, Set date
Display
Press feature key
Key not programmed
Change feature?
Select feature:
Program Rep. key:
Fax details?
Mess from:
Saved
End?