Configuring Least Cost Routing (Dics) - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 8.24 Configuring Least Cost Routing (DICS)

8.24 Configuring Least Cost Routing (DICS)

Introduction
An optiset E memory is required for programming the LCR with Assistant T.
Example
A DICS server is used.
The trunks are laid in route 1.
All numbers with a prefix are routed as extensions via the DICS, local calls are routed via the
primary carrier as normal.
Programming with Hicom Assistant T
Step Entry
1. *95 31994
2. 35-8-1
3.
* 0-0Z
4.
5.
* 0-Z
6. F7
7. 2
8.
* 1
9.
10.
* 2
11. F7
12. F7
13. 7
14. 1
15.
* 1
16.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_824.htm (1 of 3) [06/04/2000 13:13:33]
Action
Start system administration
Enter selected digits
Enter extensions that are to be routed
via DICS
Confirm Next
Other numbers are not routed
Back to dialling plan
Allocate path table
Configure path table for routed
number
Confirm Next
Configure path table for the
remaining digits
Return to dialling plan
Return to least cost routing
Configure path tables
Configure route for routed digits
Enter route
Confirm Next
Display
System Administration
Line 1: -
Line 1: 0-0Z
Line 2: -
Line 2: 0-Z
Line 1: 0
Line 1: 1
Line 2: -
Line 2: 2
Dialling plan
Least Cost Routing
Path tables
Tab 1, Line 1: 0
Tab 1, Line 1: 1
Tab 1, Line 2: 0