Siemens Hicom 150 E Office Service Manual page 304

Hicom 150 E Office Rel.1.0 Service Manual - 7.10 Other features
Extension-specific modification of language setting
It is also only possible to modify the language in the case of the first two stations with display
found. To change the language, the extension is specified in the service menu and the relevant
language is selected.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Dependencies/Limitations
Subject
System administration The languages Serbo-Croat, Slovenian, Czech and Turkish are not available
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step
1. Set language for the terminals
* 9531994
2. 14-26 => Extension Data Menu - Specify language
3. Define extension
4. Option:
a) confirm to change the defined extension only.
b) change all extensions of the same type.
c) change all extensions.
5. Confirm selected language.
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step
1. Set language for the terminals
Options
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_710.htm (10 of 19) [06/04/2000 13:07:31]
OfficePro OfficeCom
x
U
As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
for system administration.
Action
Action
OfficePoint
x x
terminal with display
P0/E
Dependency/Limitation
OfficeOne
x