Siemens Hicom 150 E Office Service Manual page 473

Hicom 150 E Office Rel.1.0 Service Manual - 7.5 Features for Incoming external traffic
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step
1. Enter DID numbers
*9531994
2. 16-11 => Call Management Inc - DID numbers
3. Enter intercept criteria
*9531994
4. 16-12 => Call Management Inc - Intercept, Day
5. 16-13 => Call Management Inc - Intercept, Night
6. 16-14 => Call Management Inc - Intercept Options
7. Enter route telephone number
*9531994
8. 20-2 => ISDN Parameter Menu - System Node No.
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Enter DID numbers
Options
2. Set up station
3. Station
4. Enter route telephone number
Options
5. Lines / networking
6. Routes
7. Enter intercept criteria
Options
8. System Parameters
9. Intercept criteria
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Place a DID call to an extension via the central office
2. The dialled extension picks up the receiver (call status).
3. Terminate call.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_75.htm (6 of 18) [06/04/2000 13:10:28]
Action
Action