Siemens Hicom 150 E Office Service Manual page 291

Hicom 150 E Office Rel.1.0 Service Manual - A System programming codes
29 2 2 Night service, off/on (for checking purposes only)
29 2 3 Trunk
29 3 Options (OfficeCom/OfficePoint only)
29 3 1 Option for option type (1...16) (for checking purposes only)
29 3 2 Option for SW version (1...16) (for checking purposes only)
29 4 Board type, select slot:
11 = TMS2
12 = TMST1 - digital
13 = TIEL
14 = TMDID
15 = TML8W
16 = TMOM
17 = TMGL8
18 = TLA2
19 = TLA4
20 = TLA8
21 = TMS2
22 = TMGL2
23 = TMGL4
24 = TMQ2
25 = TMQ4
26 = TST1 - digital
27 = STMD
28 = STLS2
29 = STLS4
30 = SLA16
31 = SLMO8
32 = SLMO24
33 = SLMC8 (CMI V1)
34 = 4SLA
35 = 8SLA
36 = 16SLA
37 = SLU8
38 = ILAN
39 = SLC16 (CMI V2.1M)
30 Remote administration
30 1 DTMF access, 0 = no access/1 = access as master/
2 = access as slave/3 = master and slave
30 2 ISDN access, CO, 0 = release/1 = without code (DID)/2 = wide code (DID)
30 3 Other access, 0 = release/1 = without code 2 = with code (DID)
30 4 Reset access code
30 5 Integrated modem
30 5 1 Call no., RMA, max. 6 digits
30 5 2 DDI, RMA
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_a1.htm (15 of 18) [06/04/2000 13:07:15]