Siemens Hicom 150 E Office Service Manual page 390

Hicom 150 E Office Rel.1.0 Service Manual - 7.1 Features for all traffic types
Subject
Feature available in
HW requirements
SW requirements
Dependencies/Limitations
Subject
Call charges
External destination The transfer must be initiated for an external destination.
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Set up a call.
2. Initiate an enquiry and call another internal extension.
3. When the called subscriber answers, transfer the call by hanging up. The transfer must be
initiated for external destinations.
7.1.6 Conference
Definition
You can include up to five subscribers in a conference call.
The party who set up the conference can remove subscribers from the conference as needed or release
the conference completely. He can also leave the conference himself without releasing the conference.
If internal subscribers still remain in the conference, the new conference leader is the user who has
been participating in the conference the longest. If only external subscribers remain in the conference,
and if no backward release criterion is present (e.g. analog trunk), a timer is started. When this timer
expires, the remaining subscribers receive a warning tone and the conference is subsequently released.
Model-Specific Data
Subject
Feature available in
HW requirements
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_71.htm (5 of 18) [06/04/2000 13:09:16]
OfficePro OfficeCom
x
-
As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Call charges accrued are charged to the subscriber transferring the call up until
the call has been transferred. The call is then charged to the destination
subscriber.
OfficePro
OfficePoint
x x
- -
Dependency/Limitation
Action
OfficeCom
x x
- -
OfficeOne
x
-
OfficePoint OfficeOne
x
-
x
-