Siemens Hicom 150 E Office Service Manual page 19

Hicom 150 E Office Rel.1.0 Service Manual - Figures
Figures
Figure 2-1 Hicom 150 E OfficePro dimensions
Figure 2-2 Hicom 150 E OfficeCom dimensions
Figure 2-3 Hicom 150 E OfficePoint dimensions
Figure 2-4 Hicom 150 E OfficeOne dimensions
Figure 2-5 Hicom 150 E OfficePro system environment
Figure 2-6 Hicom 150 E OfficeCom system environment
Figure 2-7 Hicom 150 E OfficePoint system environment
Figure 2-8 Hicom 150 E OfficeOne system environment
Figure 3-1 OfficeCom/OfficePoint CBFC interfaces (S30810-Q2950-X)
Figure 3-2 CBMOD board (S30810-Q2960-X) - switches and displays
Figure 3-3 EXTEB interfaces (S30810-Q2912-Xxxx)
Figure 3-4 PSUC interfaces (S30122-K5661-xxx)
Figure 3-5 PSUF interfaces (S30122-K5658-xxx)
Figure 3-6 Front and rear view of the PSUI (S30122-K5083-L301)
Figure 3-7 Front and rear view of the PSUI (S30122-K5083-X301)
Figure 3-8 SBS interfaces(S30817-Q905-A)
Figure 3-9 USVC interfaces (S30122-K5660-xxx)
Figure 3-10 USVF interfaces (S30122-K5659-)
Figure 3-11 Front and rear view of the USVI, settings
Figure 3-12 Discharge rates for the Hicom 150 E OfficePro battery pack
Figure 3-13 Hicom 150 E OfficePro - battery current drain of terminals
Figure 3-14 LAN Bridge interfaces (S30817-Q955-Axxx)
Figure 3-15 SLA16 (S30810-Q2702-X)
Figure 3-16 SLMC8 (S30810-Q2911-X)
Figure 3-17 SLMO8 / SLMO24 (S30810-Q2901-X / S30810-Q2901-Xxxx)
Figure 3-18 SLU8 interfaces (S30817-Q922-Axxx)
Figure 3-19 STLS2/4 interfaces (S30817-Q924-Bxxx/Axxx)
Figure 3-20 STMD8 (S30810-Q2558-Xxxx)
Figure 3-21 S0 trunk connection
Figure 3-22 S0 connection to NT
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/h150_ehb.htm (1 of 6) [06/04/2000 13:02:15]