Design Of Hicom 150 E Officecom - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 2 System data
Figure 2-1 Hicom 150 E OfficePro dimensions

2.3.2 Design of Hicom 150 E OfficeCom

Configuration notes
Hicom 150 E OfficeCom is designed as a one-cabinet system for wall assembly. The housing
accommodates six slots per shelf. The slots, which are counted from the mounting side are assigned as
follows:
Slots 1-3: peripheral boards (accommodates 2 boards per level)
Slot 4: EXTEB boards only
Slot 5: CBFC control boards only
Slot 6: optional boards (up to 5 modules)
The PSU or the optional UPS is located at the rear of the subrack.
Unlike Hicom 150 E OfficePro, Hicom 150 E OfficeCom does not require an external main
distribution frame. The connection lines to the peripherals (terminals, trunk connections, etc.) are
directly connected to the appropriate boards and fed out via a cable duct inside the housing.
Dimensions
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_2.htm (3 of 13) [06/04/2000 13:02:34]