Optiset E Memory; Connection Requirements - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 9 Terminals
Figure 9-5 optiset E memory - standard (default) key assignments
Connection requirements can be found in

9.2.1.6 Connection requirements

Hardware requirements
HW requirements Free U
Information on upgrading peripheral board for Hicom 150 E OfficePro can be found in
Connecting the equipment as a slave telephone
It is also possible to connect the equipment as a slave telephone (via the
adapter) to an existing terminal in the optiset E series (except for optiset E entry, optiset E
standard). Configurations are shown in
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_9.htm (7 of 17) [06/04/2000 13:06:13]
Section 9.2.1.6
OfficePro OfficeCom OfficePoint
port on
P0/E
SLMO8/24
Free U port on
P0/E
CBFC
SLU8
Table 9-7).
OfficeOne
Free U port on
P0/E
SBS
optiset E phone
Section 6.1.2.