Configuring Hotline Extensions - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 8.29 Configuring hotline extensions

8.29 Configuring hotline extensions

Introduction
You can configure an extension so that when the handset is lifted, a connection is automatically set up
to a predefined internal or external destination either immediately or after a delay.
An external destination can be accessed only with the aid of an external CF.
Example
When the handset on extension 120 is lifted for 15 s without dialling, a connection is to be set up
automatically to extension 110.
Programming with Hicom Assistant T
Step Entry
1. *95 31994 Start system administration
2. 18-2
3. 1
4.
*110
5. F7
6. 2
7.
#120*1
8. F7
9. 3
10.
*15
11. F8-F7
Programming with Hicom Assistant E
Step
1. Options -> Set up station -> Station -> Parameter -> Flags
2. Options -> System Parameters -> System settings
| Siemens
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_829.htm (1 of 2) [06/04/2000 13:13:58]
Traffic restriction, hotline
Hotline dest.
Specify the hotline dest.
OfficePoint = 1 hotline dest.
OfficeCom and OfficePro = 6 hotline dests.
Return to Hotline
Hotline station number
Assign extension 120 to hotline destination 1. (Flatpack
1 Hotline station no.; Compact and Modular 6 Hotline
station no.)
Return to Hotline
Hotline timeout
Set the time for executing hotline (0-99s).
Exit system administration
Action
| Home | First Page
Action
| Previous Page | Next Page
Display
System Administration
182 Hotline
1821 Hotline dest.
1821 Hotline dest.
Hotline 1: 110
182 Hotline
1822 Hotline stn no.
1822 Hotline stn no.
Ext 120: 1
182 Hotline
1823 Hotline timeout
1823 Hotline timeout
Hotline 1: 15
Set time, Set date
| Search | Info | Help |