Hicom 150 E Office Rel.1.0 Service Manual - 7.4 Features for general external traffic
2.
16-11 => Call Management Inc - DID number
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step
Action
1.
Configure S
Options
2.
Lines/networking
3.
Trunks
4.
Flags
5.
ISDN flags
1.
Configure extension
Options
2.
Set up station
3.
Station
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1.
2.
7.4.2 Routes
Definition
The external lines in the system can be combined to form routes on the basis of B channels. Route
seizure can be defined as linear (the first free line) or circular (based on last outgoing line seized).
You can program a route overflow for each of the groups. If all lines in a route are busy upon a
seizure attempt, the search for lines continues in this overflow group. In this regard, the search is only
attempted in the overflow route entered. No further overflow operation is performed if all lines in this
route are also busy.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_74.htm (2 of 10) [06/04/2000 13:10:14]
port
0
OfficePro
x
-
As of Rel. 1.0
OfficeCom
x
-
As of Rel. 1.0
OfficePoint
x
-
As of Rel. 1.0
OfficeOne
x
-
As of Rel. 1.0