Central Attendant Console - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 7.11 Networking
Subject
Conference A conference can only be set up between voice terminals.
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Set up a call.
1. Initiate an enquiry.
1. Set up a second call via CorNet.
2. Initiate a conference using the input procedure.
3. If additional subscribers are to be included in the conference, put the conference on hold, set
up another call and enable the conference.

7.11.15 Central Attendant Console

Definition
In a central attendant console, the `switching' and `recall' functions are supported within the network.
A local intercept position can forward intercepted calls via a networked extension (with call
forwarding).
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Dependencies/Limitations
Subject Dependency/Limitation
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_711.htm (15 of 17) [06/04/2000 13:11:34]
Dependency/Limitation
OfficePro OfficeCom
x
-
As of Rel. 1.0 As of Rel. 1.0
Action
OfficePoint OfficeOne
x _
- -
_
_
-
_