Siemens Hicom 150 E Office Service Manual page 268

Hicom 150 E Office Rel.1.0 Service Manual - 13 Service
Table 13-7 Error class 09 - hardware errors
No.
0 Microprocessor (error occurred)
1 Microprocessor (no error)
2 Loadware memory (error occurred)
3 Loadware memory (no error)
12 Signal failure (error occurred)
13 Signal failure (no error)
22 Clock reference (error occurred)
23 Clock reference (no error)
29 Line interruption (error occurred)
30 Short circuit (error occurred)
31 Low voltage (error occurred)
32 Thermal overload (error occurred)
34 Frame loss on STMD (error on)
35 Frame loss on STMD (error off)
36 Data slip on STMD (error on)
37 Data slip on STMD (error off)
38 Alarm display error TMS2M (error on)
39 Alarm display error TMS2M (error off)
42 No signal TMS2M (error on)
43 No signal TMS2M (error off)
44 Receive remote alarm TMS2M (error on) Disable board Replace brd
45 Receive remote alarm TMS2M (error off)
48 Bit slip on TMS2M (error on)
49 Bit slip on TMS2M (error off)
50 Loss of synchr. on TMS2M (error on)
51 Loss of synchr. on TMS2M (error off)
58 Self-test SLMO (error on)
59 Self-test SLMO (error off)
61 Overcurrent check SLMO on
62 Overcurrent check SLMO off
Error class 15 -APS
Table 13-8 Error class 15 - APS
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_13.htm (11 of 19) [06/04/2000 13:06:54]
Meaning Recovery Technician
action action
Reload board Replace brd
None None
Reload board Replace brd
None None
None Replace brd
None None
None Replace brd
None None
Disable board Replace brd
Disable board Replace brd
Disable board Replace brd
Disable board Replace brd
Disable board Replace brd
None None
Disable board Replace brd
None None
Disable board Replace brd
None None
Disable board Replace brd
None None
None None
Disable board Replace brd
None None
Disable board Replace brd
None None
Disable board Replace brd
None None
Disable board Replace brd
None None