Configuring An Isdn Multi-Device Connection With Msn No. Assignment - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 8.9 Configuring an ISDN multi-device connection with MSN no. assignment
8.9 Configuring an ISDN multi-device connection
with MSN no. assignment
Introduction
No route telephone number may be entered in the case of a multi-device connection.
However, call number/MSN (without prefix) must be entered as the DID number for the
appropriate extension.
The numbering scheme for stn. 200-749 is standard in the system.
If one of the MSNs assigned by the local network provider to the customer begins with
200-749, a collision occurs when entering the MSN in the "DID numbers" table with 1611
"DID numbers".
Example
Call no. 316475 = DID no. 316475 for ext. 200 (telephone)
Call no. 316474 = DID no. 316476 for ext. 300 (fax)
Call no. 316477 = DID no. 316477 for ext. 749 (ISDN card)
Programming with Hicom Assistant T
Step Entry
1. *95 31994
2. 16-11
3.
# 316
4.
*
5.
# 200
6.
* 316475
7.
# 300
8.
* 316476
9.
# 749
10.
* 316477
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_89.htm (1 of 2) [06/04/2000 13:12:35]
Action
Start system administration
Select DID numbers
Select the call number 316
Delete the DID number 316
Select the DID number 200
Enter the DID number 316475 Call No. 200: 316475
Select the DID number 300
Enter the DID number 316476 Call No. 300: 316476
Select the DID number 749
Enter the DID number 316477 Call No. 749: 316477
Display
System Administration
Call No. 200: 200
Call No. 316: 316
Call No. 316: -
Call No. 200: 200
Call No. 300: 300
Call No. 749: 749