Siemens Hicom 150 E Office Service Manual page 463

Hicom 150 E Office Rel.1.0 Service Manual - 7.4 Features for general external traffic
Answering and signalling initial calls and recalls.
Shuttle
Cancel enquiry
Pickup
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Max. number of call keys per optiset E
terminal
Dependencies/Limitations
Subject
Routes,
busy state
Unscreened transfer, recall The call key is reassigned if the internal destination party is not reached
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step
1. Configure call key
*91 => Entry to key programming.
2. Press relevant key
3. Assign `Call key' to the selected key.
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_74.htm (6 of 10) [06/04/2000 13:10:14]
As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
The busy state is not displayed for the entire route.
following unscreened transfer and a recall occurs.
Action
OfficePro OfficeCom
x
10 10
Dependency/Limitation
OfficePoint
x x
U - terminals
P0/E
10
OfficeOne
x
10