Call Detail Recording With Networking - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 7.11 Networking
5. 15-4 => Call Barring Menu - Barred Lists
6. 17-14 => Call Management Out - Route Type
7. 23-6 => Trunk Access Codes - Second Trunk Access Code
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step
1. Configure trunk access
Options
2. Classes of service
3. Station
4. Allowed / denied lists
5. Lines/networking, Routing parameters, Routes
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Set up an external, outgoing call from the satellite PABX via the main
PABX.
2. It is possible to set up an outgoing call depending on the extension`s trunk access.

7.11.4 Call Detail Recording with Networking

Definition
In a networked environment, charges are recorded locally by each PABX. The call detail recording
function of the Hicom 150 E Office system is not affected by networking. Charges for outgoing calls
continue to be recorded as before insofar as they are transferred by the main PABX. In environments
with satellite PABXs without their own CO, charges incurred by the main PABX are recorded
centrally in the main PABX (centralised call detail recording).
Incoming call detail information for incoming calls (e.g. transfer of a call subject to charges from a
networked PABX) are logged within the CDRC for the incoming call.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_711.htm (5 of 17) [06/04/2000 13:11:33]
Action
OfficePro OfficeCom
x
-
As of Rel. 1.0 As of Rel. 1.0
Action
OfficePoint OfficeOne
x _
- -
_
_
-
_