Siemens Hicom 150 E Office Service Manual page 550

Hicom 150 E Office Rel.1.0 Service Manual - 7.11 Networking
7.11.13 Shuttle
Definition
In networked extensions the same conditions apply as described under `Shuttle`.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Dependencies/Limitations
Subject
Hold An extension that has been put on hold cannot shuttle.
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Set up a call.
2. Initiate an enquiry.
3. Set up a second call via CorNet.
4. Switch between the two call parties using the shuttle feature.
7.11.14 Conference
Definition
The same conditions apply for this feature in networked PABXs as described under `Conference'.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Dependencies/Limitations
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_711.htm (14 of 17) [06/04/2000 13:11:34]
OfficePro OfficeCom
x
-
As of Rel. 1.0 As of Rel. 1.0
Dependency/Limitation
Action
OfficePro OfficeCom
x
-
As of Rel. 1.0 As of Rel. 1.0
OfficePoint OfficeOne
x _
- -
_
OfficePoint OfficeOne
x _
- -
_
_
-
_
_
-
_