How To Make Time Domain Gating Settings; Start, Stop, Center, And Span Gate Times; Gating Type - Keysight N9913A User Manual

Fieldfox analyzers

Hide thumbs Also See for N9913A:

Table of Contents

Time Domain – Option 010

How to make Time Domain Gating settings

— Press Measure Setup 4

— Then choose from:

These settings specify the time in the trace to be gated (in or out). The gate

times can be specified using either Start and Stop or Center and Span.

— A settings table appears that allows you to navigate and select the

This setting defines the type of filtering that will be performed for the gating

function. The gate start and stop flags on the display point toward the part of

the trace you want to keep.

Choose from the following:

Keysight N9927-90001 User's Guide

Trace 4 shows the frequency response with gating enabled.

Gating is being performed.

Gating is NOT being performed.

Gating Start Stop

following settings. These settings are made exactly like those made on the

Transform Settings table. Learn how in

KEEPS the responses within the Gating Start and Stop times.

REMOVES the responses within the Gating Start and Stop times.

"Transform Settings Table" on

Table of Contents