Hitachi Compute Blade 2000 User Manual page 1845

An example of using SMASH-CLP is shown below.
To show the server blade status:
cd /admin1/system1
show
To power on the server blade:
start /admin1/system1
To power off the server blade:
stop /admin1/system1
To perform hardware reset on the server blade:
reset /admin1/system1
To switch to PXE boot:
cd /admin1/system1/settings1/bootcfgsetting1
set bootorder=/admin1/system1/settings1/bootcfgsetting1/bootsrcsetting3
To cancel PXE boot, specify bootsrcsetting4 instead of bootsrcsetting3.
1794