Devices Supporting Pcie Error Isolation Mode - Hitachi Compute Blade 2000 User Manual

 Note on redundant system configuration
The PCIe error isolation mode avoids rebooting the system when certain failures
occur in a PCI express. Then, with N+M cold standby or HA cluster software,
switching between active and standby may not be performed. With redundant
system configuration, set the PCI error handling mode to Legacy. When setting the
PCI error handling mode to PCIE Error Isolation, confirm that redundancy is
configured on each expansion board and expansion card, and then enable the PCIe
error isolating setting for them.
Devices supporting PCIe error isolation
mode
 PCIe devices supporting error isolation mode
Isolation-mode-capable device
I/O 1 Gbps Ethernet x2
adapter
1 Gbps Ethernet x4
10 Gbps Ethernet
x2
8 Gbps Fibre-
channel x1, Hitachi
8 Gbps Fibre-
channel x2, Hitachi
8 Gbps Fibre-
channel x2, Emulex
4 Gbps Fibre-
channel x2, Hitachi
Mezzanine 1 Gbps Ethernet x4
card
8 Gbps Fibre-
channel x2, Hitachi
8 Gbps Fibre-
channel x4, Hitachi
8 Gbps Fibre-
channel x2, Emulex
When using the PCIe error isolation mode with the system in which a not-capable-
PCIe-error-isolation device is installed, disable the PCIe error isolation setting for
Mezzanine for a mezzanine card; PCIe Slot for an I/O adapter referring to "EFI
Setup" in Chapter 5.
Model code
GVX-CN2N1G1X1
GVX-CN2D1G1X1
GVX-CN2N1G2X1
GVX-CN2D1G2X1
GVX-CN2NXG2X1
GVX-CN2DXG2X1
GVX-CC2N8G1X1
GVX-CC2D8G1X1
GVX-CC2N8G2X1
GVX-CC2D8G2X1
GVX-CC2N8G3X1
GVX-CC2D8G3X1
GVX-CC2N4G1X1
GVX-CN2M1G1X1
GVX-CC2M8G1X1
GVX-CC2M8G2X1
GVX-CC2M8G3X1
1787
OS/Virtual environment
RedHat
Windows
Enterprise
Server 2008
Linux
R2
5.4/5.6
 
 
 
 
 

-
- -
 
 
 

-