Table of Contents
Advertisement
(2) Disconnect the harness clamps by unlocking the
clamps.
(3) Remove the engine harness from the cylinder head.
10. Disconnect the water hoses
11. Remove the surge tank stay No. 1, No. 2 and No. 3.
12. Disconnect the fuel inlet hose and return hose.
CAUTION:
•
The fuel pressure at inside of the fuel line is approxi-
mately 284 kPa higher than the atmospheric pressure.
•
Therefore, be sure to gradually pull out the rubber hose
so as to prevent fuel from splashing.
13. Disconnect the rubber hoses for brake booster and VSV.
EM–27
JEM00096-00083
JEM00097-00084
JEM00098-00085
Inlet
Return
JEM00099-00086
JEM00100-00087
Advertisement
Table of Contents
