Table of Contents
Advertisement
SR–22
19. Removal of rack and cylinder side rack oil seal
(1) Insert a 20 mm-dia. bar or a suitable tool from the rack
housing side. Remove the cylinder side rack oil seal
and rack together, using a press.
(2) Remove the oil seal from the rack.
20. Removal of the rack housing side rack oil seal
(1) Insert a 27 mm-dia. remover or a suitable tool from the
rack housing side. Remove the rack oil seal and spac-
er at the rack housing side, using a press.
21. Removal of steering rack oil seal ring and O-ring
(1) Cut off the seal ring No. 2 from the rack sub-assembly
by means of a cutter or the like.
NOTE:
·
When cutting off the seal ring No. 2, be very careful not
to scratch the ring groove and side surface.
(2) Remove the O-ring from the rack sub-assembly by
means of a small screwdriver or the like.
NOTE:
·
Never reuse the removed O-ring.
22. Remove the bearing guide nut oil seal, using a 32 mm-dia.
remover or a suitable tool (e.g. 22 mm socket wrench) in
combination with a press.
23. Remove the control valve housing oil seal and bearing,
using a 27 mm-dia. remover or a suitable tool in combina-
tion with a press.
JSR00073-00067
JSR00074-00068
JSR00075-00069
32 mm
JSR00076-00070
JSR00077-00071
Advertisement
Table of Contents
