Daihatsu 1997 Terios J100 Service Manual page 476

(6) Assemble the thrust needle roller bearing to the 2nd
brake drum.
NOTE:
•
Make sure that the thrust needle roller bearing is as-
sembled in the correct direction.
REFERENCE:
Dimensions of thrust needle roller bearing
Outer diameter:
Inner diameter:
Thickness:
(7) Assemble the forward clutch hub to the 2nd brake
drum.
(8) Assemble the 2nd brake drum to the transmission
case.
15. Assembly of intermediate shaft subassembly
(1) Assemble the thrust needle roller bearing and thrust
bearing race to the intermediate shaft subassembly.
NOTE:
•
Make sure that the thrust needle roller bearing is as-
sembled in the correct direction.
REFERENCE:
Dimensions of thrust needle roller bearing
Outer diameter:
Inner diameter:
Thickness:
(2) Assemble the intermediate shaft subassembly.
NOTE:
•
Be sure to apply ATF to the intermediate shaft sub-
assembly before assembling.
16. Assemble the thrust needle roller bearing to the intermedi-
ate shaft subassembly.
NOTE:
•
Make sure that the thrust needle roller bearing is as-
sembled in the correct direction.
REFERENCE:
Dimensions of thrust needle roller bearing:
Outer diameter:
Inner diameter:
Thickness:
46.5 mm
25 mm
5 mm
32 mm
16.5 mm
4.1 mm
32 mm
16.5 mm
4.1 mm
AT–75
JAT00207-00182
JAT00208-00183
JAT00209-00184
JAT00210-00185
JAT00211-00186