Daihatsu 1997 Terios J100 Service Manual page 865

Adjustment of ventilation control
1. Ensure that the control levers move in a right-and-left di-
rection without stiffness and binding over the full range of
each lever.
2. Set the air outlet control lever to the VENT mode. Clamp
the outer cable while pulling the outer cable toward VENT
side.
3. Set the temperature control lever to the COOL mode.
Clamp the outer cable while pushing the outer cable to-
ward COOL side.
4. Set the air inlet mode selector lever to the RECIRC mode.
Clamp the outer cable while pulling the outer cable toward
RECIRC side.
5. After completion of the adjustments in the steps 2 through
4, set the blower switch to the most highest position.
Check the following items.
(1) When the VENT mode is selected, ensure that no air
leaks from the foot side outlet and defroster.
(2) When the DEF mode is selected, ensure that no air
leaks from the foot side outlet and register.
(3) When the FOOT mode is selected, ensure that no air
leaks from the register. if not, readjust the control lever.
Blower
Air outlet
fan switch
control lever
VENT mode
OFF
COOL mode
Temperature
L.H.D
control lever
With A/C
Stopper
FOOT mode
DEF mode
VENT mode
OFF
BE–31
Air inlet mode
selector lever
RECIRC mode
A / C
A/C
switch
JBE00089-01331
JBE00090-01332
JBE00091-01333
With out A/C
Stopper
JBE00092-01334
A / C
JBE00093-01335