Table of Contents
Advertisement
(3) Assemble the compression spring and accumulator
No. 2 piston to the transmission case.
33. Assembly of B1 accumulator piston
(1) Measure the free length and outer diameter of the B1
accumulator compression spring.
Reference Value:
Free Length:
Outer Diameter:
(2) Coat the A section of the new accumulator seal No. 1
and No. 2 ring with ATF.
(3) Install the accumulator seal No. 1 and No. 2 ring to the
accumulator No. 1 piston.
NOTE:
•
Do not spread the seal ring end excessively.
(4) Install the accumulator No. 1 piston to the transmission
case.
(5) Install the compression spring.
34. Assembly of valve body
(1) Ensure that the manual valve operates smoothly with-
out any binding.
(2) Set the manual valve to the neutral position, using the
following SST.
SST:
09351-87211-000
50.5 mm
20 mm
AT–83
JAT00245-00219
JAT00246-00220
JAT00247-00221
JAT00248-00222
JAT00249-00223
Advertisement
Table of Contents
