Table of Contents
Advertisement
NOTE:
·
Do not expand the seal ring excessively.
When attaching the ring, apply power steering fluid to
the seal ring.
Be very careful not to twist the seal ring during the in-
stallation. Also, at most care must be exercised so as
not to scratch the ring by your finger nails during the in-
stallation.
After completion of the installation, be sure to apply
power steering fluid to the ring groove again.
(3) Hold the expanded seal ring by your hand and con-
tract it so that the ring may be bedded in.
2. Installation of rack housing side rack oil seal
Insert the spacer and oil seal in this order from the cylin-
der tube side, using the following SSTs in combination with
a press.
SST:
09631-00020-000
09631-12020-000
3. Installation of rack cover tube to power steering rack sub-
assembly
(1) Pack lithium base grease to the bottom land of the
steering rack tooth.
NOTE:
·
Care must be exercised so that the ventilation hole of
the steering rack may not be restricted with grease.
(2) Apply power steering fluid to the steering seal ring
No. 2.
SR–25
JSR00088-00082
JSR00089-00083
JSR00090-00084
JSR00091-00085
Advertisement
Table of Contents
