EM–114
(4) Wipe off any oil from the cylinder head cover gasket
attaching surface of the cylinder head.
(5) Install the cylinder head cover to the cylinder head.
CAUTION:
•
Be very careful not to damage the spark plug tube rub-
ber grommet during installation.
(6) Install the tighten the cylinder head cover attaching
bolts to the specified torque, following the sequence in
the right figure.
Tightening Torque:
(7) Install and tighten the ignition coils to the engine.
(8) Connect the resistive cords.
10. Install the timing belt.
(Refer to the timing belt section)
2.9 - 4.9 N·m
JEM00488-00440
JEM00489-00000
JEM00490-00441
JEM00491-00442
JEM00492-00000