Table of Contents
Advertisement
EM–116
7. Install the clutch housing under cover to the transmission.
Tighten the attaching bolts to the specified torque.
Tightening Torque:
8. Install the engine stiffener to the engine and tighten it to
the specified torque.
Tightening Torque:
9. Installation of exhaust pipe
(1) Install the front exhaust pipe to the exhaust manifold
with a new gasket interposed.
NOTE:
•
Do not reuse the used gasket.
(2) Temporarily tighten the exhaust pipe attaching nut of
the exhaust manifold.
(3) Connect the front exhaust pipe to the main muffler with
a new gasket interposed.
(4) Tighten the attaching nuts to the specified torque.
Tightening Torque:
(5) Install the front exhaust pipe clamp bracket to the
transmission.
Tighten the attaching bolts to the specified torque.
Tightening Torque:
49 - 68.6 N·m
29.0 - 44.0 N·m
41.6 - 62.4 N·m
15.2 - 22.8 N·m
JEM00498-00448
JEM00499-00449
JEM00500-00450
JEM00501-00451
JEM00502-00452
Advertisement
Table of Contents
