Daihatsu 1997 Terios J100 Service Manual page 507

4. Visually inspect the transfer front drive gear and the trans-
fer output front shaft gear for damage or wear.
5. Visually inspect the transfer front drive chain for damage
or wear.
6. Check the contact surface between the differential lock
shift fork (A) and the transfer clutch outer hub (B).
(A)
(B)
7. Measure the outer diameter of the shaft and socket sec-
tion.
If the measured valve does not conform to the specifica-
tion, replace the parts.
Also inspect the snap ring for damage or wear.
(A)
(B)
Outer diameter of the shaft
8. Visually inspect the transfer shift shaft for damage or wear.
NOTE:
•
Also inspect the diaphragm for damage.
Specified value Allowable limit
–0.1
7
–0.2
+0.06
7.2
+0
Specified value Allowable limit
–0
12
–0.1
–0
12
–0.1
–0.13
14
–0.063
Unit: mm
6.7
7.3
Unit: mm
11.8
11.8
←
TR–11
JTR00043-00604
JTR00044-00605
JTR00045-00606
A
B
JTR00046-00607
JTR00047-00608
(A)
(B)