Table of Contents
Advertisement
MA–38
CHECK OF OIL COOLER HOSE
Inspect the following points. If any problem is found, repair
them, as required.
1. Hoses and tubes for scratches or cracks.
2. Hoses for aging such as deformation and swelling.
3. Tubes for corrosion or rusting.
4. Tube clamps and related parts for tightness, rattle or dam-
age.
5. Connection for fluid leakage.
6. Hoses for extreme bending, twisting or pulling.
CLUTCH
FREE PLAY
1. Lightly depress the clutch pedal by hand,until you feel re-
sistance. Then, measure the free play.
Specified Clutch Pedal Free Play:
If the clutch pedal free play fails to meet with the specifi-
cation, adjust the clutch pedal free play to the specified
value.
(Refer to the CL section.)
RESERVE TRAVEL
1. Start the engine.
2. Ensure that the difference of clutch pedal upper surface
height at clutch pedal depressed fully and clutch pedal
positioned at point where the clutch just disengage is con-
forms to the specified value.
Specified Reserve Travel:
If the reserve travel fails to conform to the specification,
adjust the reserve travel by adjusting the free play or re-
place the clutch disc, clutch cover and related damaged
parts, as required.
(Refer to the CL section.)
15 - 30 mm
25 mm or more
15 - 30 mm
Position
depressed fully
JMA00108-00000
JMA00109-00086
Position clutch
just disengage
25 mm or more
JMA00110-00087
Advertisement
Table of Contents
