Table of Contents
Advertisement
EM–74
(3) Lock the flywheel to prevent the crankshaft from turn-
ing, using the following SST.
SST:
09210-87701-000
(4) Loosen the connecting rod bearing cap nuts evenly
over two or three stages. Then, remove the connecting
rod bearing cap nuts.
(5) Cover each connecting rod bolt with a short piece of
hose to protect the crankpin journal from damage.
(6) Push out the piston and connecting rod assembly and
the upper bearing through the top of the cylinder
block.
NOTE:
•
Arrange the disassembled pistons and connecting rod
in order so that their installation positions may be
known readily.
•
Care should be exercised so as not to damage the
bearings.
25. Remove the flywheel.
NOTE:
•
Prevent the ring gear from turning with the SST.
SST:
09210-87701-000
09210-87701-
000
SST
JEM00306-00283
JEM00307-00284
JEM00308-00285
JEM00309-00286
JEM00310-00287
Advertisement
Table of Contents
