Table of Contents
Advertisement
(3) Install the pressure plate, lining up the locating pin of
the pressure plate. Tighten the attaching bolts to the
specified torque.
Tightening Torque:
12. Install the water hose for the throttle body use to the cylin-
der block. Attach the hose bands.
13. Install the thermostat in the cylinder block in such a way
that the jiggle pin section may come at the upper side.
CAUTION:
•
Make sure to install the jiggle pin of the thermostat in
the correct direction. Failure to observe this precaution
may cause overheating.
Identification of Thermostat
Destination
European Cold spec.
General spec.
14. Install the water inlet.
Tightening Torque:
15. Install the alternator bracket.
Tightening Torque:
14.7 - 21.6 N·m
Identification color
Green
Black
5.9 - 8.8 N·m
34.3 - 49.0 N·m
EM–109
09301-87601-000
JEM00461-00414
JEM00462-00415
Jiggle pin
JEM00463-00416
JEM00464-00417
JEM00467-00420
Advertisement
Table of Contents
