Daihatsu 1997 Terios J100 Service Manual page 279

4. Removal of radiator
(1) Temporarily detach the power steering vane pump.
(2) Remove the radiator hose No. 1 and the breather
hoses at radiator side.
CAUTION:
•
When the radiator hose is loosened, be sure to protect
the alternator because the coolant flows out.
(3) Disconnect the radiator hose No. 2 from the radiator
lower tank.
(4) Remove the two attaching bolts of the radiator upper
tank.
(5) Remove the two attaching bolts of the fan shroud.
Then, disconnect the lock section of the fan shroud
from radiator.
(6) Remove the four attaching nuts of the cooling fan.
(7) Remove the fan shroud and the cooling fan at the
same time.
(8) Remove the radiator.
INSTALLATION OF RADIATOR
1. Radiator installation
(1) Place the radiator fan shroud to the cooling fan side.
(2) Install the radiator in the engine room.
NOTE:
•
Before attaching the fan shroud to the radiator, insert
the lock section of the fan shroud to the lower section
of the radiator.
(3) Tighten the two attaching bolts of the radiator upper
tank.
(4) Tighten the two attaching bolts of the fan shroud.
CO–17
JCO00057-00047
JCO00058-00048
JCO00000-00049
JCO00060-00050
JCO00061-00051