DOOR LOCK MOTOR
Unit inspection
1. Detach the door locking knob from the control link.
2. Remove the door trim-related parts.
3. Remove the link-related parts.
4. Remove the attaching screws of the lock assembly.
5. Take out the lock assembly.
6. Apply a voltage of 12 V between the following two termi-
nals. Ensure that the plunger operates in accordance with
the table below.
Operation direction
LOCK
UNLOCK
DOOR CONTROL RELAY
See page BE–45, ITC.
Terminal
q
:
;
w
;
:
BE–33
Motor
Door lock
control SW
JBE00097-01404
JBE00098-01405