Seat Belt - Daihatsu 1997 Terios J100 Service Manual

BO–40

SEAT BELT

FRONT SEAT BELT
Turning-preventive beads
FRONT SEAT BELT
REMOVAL
1. Remove the center pillar lower garnish.
(Refer to the trim & garnish section.)
2. Open the seat belt attaching bolt cover.
3. Remove the front seat belt shoulder belt guide by remov-
ing the attaching bolts.
4. Remove the seat belt anchor attaching bolts
5. Remove the seat belt retractor by removing the attaching
bolt and screw.
6. Removal of inner seat belt
(1) Remove the front seat. (Refer to the front seat section.)
(2) Remove the inner seat belt by removing its attaching
bolts.
9 ± 2 (0.9 ± 0.2)
: Tightening torque
Unit : N·m (kgf-m)
40.5 ± 12.5 (4.2 ± 1.3)
2.5 ± 1.0 (0.3 ± 0.1)
If the threaded portion is damaged,
use an oversized ET screw.
40.5 ± 12.5 (4.2 ± 1.3)
Tightening should be made, aligning
with the turning-preventive bead.
40.5 ± 12.5 (4.2 ± 1.3)
Screw
öŸ
øŸ
öŸ
øŸ
JBO00101-00086
JBO00102-00087
JBO00103-00088