Table of Contents
Advertisement
DF–14
16. Remove the T type oil seal, using the following SST.
SST:
09308-10010-000
17. Remove the differential drive pinion spacer and shims
from the differential carrier, using a hydraulic press or tap-
ping the drive pinion, using a hydraulic press.
CAUTION:
•
Never drop the drive pinion on the floor.
•
Be very careful not to damage the threaded section of
the drive pinion.
NOTE:
•
Measure the thickness of the removed shims for the
reference value at assembly.
18. Remove the tapered roller bearing from the drive pinion,
using the following SST or the like.
SST:
09950-87701-000
Front
SST
Rear
SST
Front
Rear
SST
JDF00043-00040
JDF00000-00041
JDF00044-00042
JDF00000-00043
JDF00045-00044
Advertisement
Table of Contents
