Table of Contents
Advertisement
MA–8
4. Inspection of fuel line and connection
(1) Visually inspect the fuel line including the fuel hose for
connecting condition, cracks, tightness, leakage and
damage.
If cracks or any other damage exists, repair or replace
the part as required.
(2) Check the connecting section of the fuel line for loose-
ness and leakage.
If looseness or leakage exists on the connected sec-
tions of the fuel line, repair or replace the parts as re-
quired.
(3) Ensure that the ignition switch is turned OFF.
(4) Open the relay box cover in the engine compartment.
(5) Remove the fuel pump relay from the relay box.
CAUTION:
·
Prevent dust or water, etc. from entering the connector.
Entering of dust, water or contamination of the termi-
nals in the fuel pump relay connector may cause fuel
pump malfunction or other serious malfunctions, due to
lowered insulation of each terminal.
(6) Connect the No. 1 and No. 2 terminals of the fuel
pump relay in the relay box with suitable wires or the
like as shown.
CAUTION:
·
Never deform or damage the terminals during the con-
nection.
·
Never make connection on a terminal except for those
specified.
Even slight contact of the other terminal causes serious
trouble.
·
Prevent dust or water, etc. from entering the relay box.
Entering of dust, water or contamination of the termi-
nals in the relay box causes serious malfunction, due
to lowered insulation of each terminal.
(7) Turn ON the ignition switch.
(8) Ensure that no fuel leakage exists on the fuel line.
If fuel leakage exists, repair or replace the part as re-
quired.
(9) Turn OFF the ignition switch.
q
w
e
r
JMA00012-00008
JMA00013-00009
Advertisement
Table of Contents
