3. Install the plate washer in place.
Install the snap ring.
4. Install the clutch.
5. Install the stop collar and a new snap ring. Compress the
snap ring, using a vise or the like.
6. Tap the collar so that it may come onto the snap ring,
using a screwdriver.
7. Installation of planetary gear
(1) Install the plate washer.
(2) Install the three planetary gears.
(3) Install the plate for starter armature.
NOTE:
•
Be certain to install the plate, aligning with the mate
mark on the center bearing.
ST–17
JST00067-00063
JST00068-00064
JST00069-00065
JST00070-00066
JST00071-00067