Table of Contents
Advertisement
6. Install the instrument finish lower panel and install two at-
taching screws.
7. Install the brake master cylinder.
(Refer to the brake master cylinder section for installation.)
CAUTION:
·
Be sure to follow the installation procedure for the
brake master cylinder described in the above men-
tioned section. Failure to observe this caution may lead
to serious accidents or problems.
8. Perform the air bleeding.
(Refer to BR–4.)
9. Check the brake performance with a four-wheel brake
tester.
BR–15
JBR00050-00000
Advertisement
Table of Contents
