Table of Contents
Advertisement
EM–26
6. Remove the power steering vane pump from the engine.
Suspend the removed steering vane pump at body side,
using an adequate rope.
7. Removal of alternator
(1) Remove the connector and the cable at the rear side
of the alternator.
(2) Remove the alternator with the belt tension adjusting
bar.
8. Remove the timing belt.
9. Removal of engine wire from cylinder head.
(1) Disconnect the connector of the engine wire from the
following parts.
q Ignition coils
w Injectors
e Pressure sensor
r Throttle position sensor
t Intake air temperature sensor
y Idle-up VSV
u Water temperature sensor
i Oxygen sensor
o Cam angle sensor
JEM00091-00079
JEM00092-00080
JEM00093-00000
JEM00094-00081
JEM00095-00082
Advertisement
Table of Contents
