Table of Contents
Advertisement
BO–84
9. Disconnect the connector of the wire harness from the fuel
pump with motor and bracket located upper side of fuel
tank while unlocking the lock on the connector.
10. Support the fuel tank with suitable jack or bench.
11. Remove the fuel tank by removing the four attaching bolts.
12. Removal of the fuel hoses from the fuel pump with motor
and bracket (fuel pump assembly) by following manner.
(1) Disconnect the main fuel hose from fuel pump assem-
bly by pull it out while retracting the retainer as shown.
CAUTION:
·
Never reuse the removed fuel hose again. Failure to
observe this caution may lead to fuel leakage.
(2) Remove the fuel main hose from fuel tank by unlocking
the main hose from the hose clips.
(3) Remove the retainer for quick connector from the fuel
pump assembly.
(4) Disconnection of the fuel return hose
q Hold the checker as shown.
w Turn the checker to 90 degree in clockwise direc-
tion while pushing the checker to connector side.
e Pull out the fuel hose from fuel pump assembly
while pushing the checker to connector side.
(5) Remove the fuel return hose from the fuel tank by un-
locking the fuel return hose from the hose clamps.
(6) Remove the checker for quick connector from the fuel
tank assembly.
JBO00223-00190
JBO00224-00191
JBO00225-00192
JBO00226-00193
JBO00227-00194
Advertisement
Table of Contents
